ATEX/IECEx Certified Explosion Proof LED Lighting
Explosion-proof Lighting Series
Fanxstar provides Explosion-Proof Lighting for markets, delivering certified products, one-stop supply support & technical consulting for industrial sites
Engineered for Hazardous Locations
-
Explosion-proof: Contains any internal explosion without igniting the external atmosphere.
-
Waterproof (IP66): Sealed against high-pressure water jets and marine corrosion.
-
Corrosion-proof: Powder-coated surface resists salt spray and chemical exposure.
Industries We Serve
Explosion-proof Lighting: Frequently Asked Questions
Explosion-proof lighting refers to luminaires specifically designed and certified to operate safely in hazardous environments where flammable gases, vapors, mists, or combustible dusts may be present.
These terms are often used interchangeably but have nuanced differences:
-
Explosion-proof/Flameproof (Ex d): Specifically refers to fixtures that contain an explosion within the housing. This is the most common and robust protection type.
-
Increased Safety (Ex e): Focuses on preventing sparks and excessive temperatures under normal operation.
-
Hazardous Location: The general term for all equipment approved for use in classified dangerous areas (which include explosion-proof, dust-ignition-proof, etc.).
These are major international certification standards for equipment used in explosive atmospheres:
-
ATEX: Mandatory for products sold in the European Union. (Directive 2014/34/EU).
-
IECEx: An international certification system facilitating global market acceptance.
-
UL Listed: A key safety standard for the North American market (UL 844 for Hazardous Location Luminaires).
-
For China: The national standard is GB 3836, and the China Compulsory Certification is Ex Proof CCC.
It is critical in any industry processing or handling flammable materials:
-
Oil & Gas (drilling rigs, refineries, pipelines)
-
Chemical & Pharmaceutical Plants
-
Mining (especially coal mines)
-
Grain Silos & Food Processing (combustible dust)
-
Paint Spray Booths, Fuel Storage Areas, Wastewater Treatment Plants
-
Zone/Division & Gas Group: Identify the specific area classification (e.g., Zone 1, Class I Division 1) and the type of flammable substance (Gas Group IIA, IIB, IIC).
-
Temperature Class (T-Rating): The fixture’s maximum surface temperature must be lower than the auto-ignition temperature of the surrounding gases or dusts.
-
IP Rating: For dust and water ingress protection (e.g., IP65, IP66).
-
Material & Construction: Robust housing materials like cast aluminum or stainless steel.
-
Light Source & Efficiency: Modern LED fixtures offer superior energy efficiency, longer life, and reduced maintenance.
